Dpr 1020 пароль по умолчанию

Страница 3

Порт Ethernet (LAN)

Разъем питания постоянного тока

Кнопка Reset (на нижней панели)

USB-порт принтера DPR-1020 расположен на задней панели. Этот порт может

быть настроен с помощью web-интерфейса управления.
По умолчанию на DPR-1020 установлено автоматическое получение IP-адреса

от DHCP-сервера в сети. Если DHCP-сервер не найден, то IP-адрес для DPR-

1020 по умолчанию 192.168.0.10.

ПРИМЕЧАНИЕ: IP-адрес компьютера должен быть из той же подсети, что

IP-адрес принт-сервера для коммуникации двух устройств

(например, IP-адрес принт-сервера — 192.168.0.10 с маской

подсети 255.255.255.0, IP-адрес компьютера должен быть

такой — 192.168.0.x, где x – это значение между 1-254, за

На задней панели принт-сервера находится разъем RJ-45 для подключения

кабеля Ethernet 10/100 Мбит/с 5 категории. Порт поддерживает протокол NWay,

позволяющий принт-серверу автоматически определять или согласовывать

скорость передачи по сети.

Разъем питания постоянного тока расположен на задней панели принт-сервера

и обозначен как DC 5V.

Нажмите и отпустите эту кнопку для перезагрузки MFP-сервера. Для возврата

к заводским настройкам нажмите и удерживайте эту кнопку в течение трех

секунд, пока индикатор USB на передней панели не загорится, затем отпустите

First off, I would like to provide you a link with the print server’s manual to download it directly and have it as spare.

The printer you are trying to install is a laser printer (black/white only) and probably a bit old model.
Therefore, if you are trying to print from your computer over ethernet, and you have windows vista or 7 (64 or 32bit accordingly) you might have the inappropriate drivers for either the print server or the printer. You can find all of the HP printer’s drivers HERE. Select carefully based on your OS.

As a SIDENOTE: If you just need the drivers installed and there are only larger setup execut. files available, you can use 7zip or winace to open up the *.exe file and navigate to the appropriate folder and extract only that one to your computer and install the driver(s) from there.

The D-Link DP-301U print server drivers are available HERE. Default username and password for the management console of the print server can be found at pdf manual page 25. The url to access the administration console is dlink-******,where the asterisks stand for the last 6 digits of the print server MAC address.

Читайте также:  Как не тратить трафик на теле2

Overall, not to make things over-complicated (150+ PDF user manual pages) you need to do the following:

1. Install the appropriate drivers of your hp printer on the computer that will have also print serv. softare installed.
2. Install the appropriate software/drivers of the dlink print server on the same computer.
3. Plugin the usb cable of your printer to the print server’s USB port.
4. Plugin the ethernet cable of your print server port to the ethernet port of your home router/switch.
5. Setup Fixed IP settings for your print server configuration (page 20 on the manual).

Let me know how that went. I believe you will manage to do it that way quite easily.

**Don’t Forget to vote how helpful this was.**

Regards from FixYa.com

dpr 1020 пароль
D-Link • Просмотр темы — Пароль к DPR-1020
Прошу прощения
Можно уточнить что за пароль и каким образом удалось настроить работу данного принт-сервера с Xerox 5020/B ?
В моем случае Xerox отказывается печатать что-либо, хотя определяется принт-сервером и статус стоит как "on-line".

заранее спасибо, за помощь!


D-Link • Просмотр темы — Пароль к DPR-1020
Прошу прощения
Можно уточнить что за пароль и каким образом удалось настроить работу данного принт-сервера с Xerox 5020/B ?
В моем случае Xerox отказывается печатать что-либо, хотя определяется принт-сервером и статус стоит как "on-line".

заранее спасибо, за помощь!

D-Link DPR-1020 — Инструкция (Страница 3)

Порт Ethernet (LAN)

Разъем питания постоянного тока

Кнопка Reset (на нижней панели)

USB-порт принтера DPR-1020 расположен на задней панели. Этот порт может

быть настроен с помощью web-интерфейса управления.
По умолчанию на DPR-1020 установлено автоматическое получение IP-адреса

от DHCP-сервера в сети. Если DHCP-сервер не найден, то IP-адрес для DPR-

1020 по умолчанию 192.168.0.10.

ПРИМЕЧАНИЕ: IP-адрес компьютера должен быть из той же подсети, что

IP-адрес принт-сервера для коммуникации двух устройств

(например, IP-адрес принт-сервера — 192.168.0.10 с маской

подсети 255.255.255.0, IP-адрес компьютера должен быть

такой — 192.168.0.x, где x – это значение между 1-254, за

На задней панели принт-сервера находится разъем RJ-45 для подключения

кабеля Ethernet 10/100 Мбит/с 5 категории. Порт поддерживает протокол NWay,

позволяющий принт-серверу автоматически определять или согласовывать

скорость передачи по сети.

Разъем питания постоянного тока расположен на задней панели принт-сервера

и обозначен как DC 5V.

Нажмите и отпустите эту кнопку для перезагрузки MFP-сервера. Для возврата

к заводским настройкам нажмите и удерживайте эту кнопку в течение трех

секунд, пока индикатор USB на передней панели не загорится, затем отпустите

Posted by Anonymous on May 30, 2012

1 Answer

Bryan Corringham

An expert who has achieved level 1.

An expert that has 1 follower.

Username is "admin"
Password is blank

Posted on May 15, 2014

Читайте также:  Win 10 rdp patch

6 Suggested Answers

6ya staff

  • 2 Answers

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Instant Repair Help over the Phone

Save Time & Money by instantly connecting to.

Posted on Jan 02, 2017

pinball_fan

  • 3 Answers

It’s in the quick installation guide, which is freely downloadable from their web site. Top of page #3.

"The factory default IP address of the DP-301U is 192.168.0.10."

Posted on Dec 31, 2008

Anonymous

  • 47 Answers

I have a DLink DPR-1260, and found the configuration to be challenging too. First of all, has it ever worked? If not, you may need to check your router config to ensure that they are both on the same subnet. Typically they come set to 192.168.x.x. if the router is set to 192.168.1.1, the print server is set to 192.168.0.10, and your subnet mask is set to 255.255.255.0. it’ll never connect. Make sure that the router and print server are configured to the same subnet. 192.168.1.x for example. and then try it. Let us know if that doesn’t resolve your issue, and we’ll keep working with you.

Posted on Nov 02, 2007

Anonymous

Reset The Printserver from Backside & Gave PAssword again

Posted on Jul 03, 2008

Anonymous

  • 9 Answers

dont’ worry about what the d-link site says. its because they haven’t tested it. i got my dp-301u to work fine with my hp1020 on 2 different workstations with the following steps.

1. install printer locally via usb and test.
2. create a second printer as per the dlink manual creating a port. don’t worry about the name as we will delete it.
3. once created go into the properties of the 2nd printer and change the port to something local — anything will do to free up the port.
4. go into the properties of the printer that was created in step 1. and change the port to that of the print server.
5. test print. should work fine.

Posted on Sep 21, 2009

Patrick Odita

  • 324 Answers

please re-install print server and printer

Posted on Mar 26, 2010

Add Your Answer

Tips for a great answer:

  • — Answer the question.
  • — If you need clarification, ask it in the comment box above.
  • — Better answers use proper spelling and grammar.
  • — Provide details, support with references or personal experience.

Draw a box over the problem!!

Attachments: Added items

Complete. Click "Add" to insert your video. Add

Читайте также:  Logitech driving force gt не калибруется

Printing on HP Laserjet 1020 connected to the network through DLink DPR-1020 print server

Need default password

the first time you access http://192.168.0.50 it will ask you for username and password. Type the default username and password. If you don’t know try one of these:

Username: admin
Password: password

Username: admin
Password: No password (just hit enter after you type the username)

Username: admin
Password: admin

I am using DP-301U print server and wanting to attach with hp 1020 plus. However the printer in not printing. what is the root cause and give the solution please.

Hello and welcome to fixya.

First off, I would like to provide you a link with the print server’s manual to download it directly and have it as spare.

The printer you are trying to install is a laser printer (black/white only) and probably a bit old model.
Therefore, if you are trying to print from your computer over ethernet, and you have windows vista or 7 (64 or 32bit accordingly) you might have the inappropriate drivers for either the print server or the printer. You can find all of the HP printer’s drivers HERE. Select carefully based on your OS.

As a SIDENOTE: If you just need the drivers installed and there are only larger setup execut. files available, you can use 7zip or winace to open up the *.exe file and navigate to the appropriate folder and extract only that one to your computer and install the driver(s) from there.

The D-Link DP-301U print server drivers are available HERE. Default username and password for the management console of the print server can be found at pdf manual page 25. The url to access the administration console is dlink-******,where the asterisks stand for the last 6 digits of the print server MAC address.

Overall, not to make things over-complicated (150+ PDF user manual pages) you need to do the following:

1. Install the appropriate drivers of your hp printer on the computer that will have also print serv. softare installed.
2. Install the appropriate software/drivers of the dlink print server on the same computer.
3. Plugin the usb cable of your printer to the print server’s USB port.
4. Plugin the ethernet cable of your print server port to the ethernet port of your home router/switch.
5. Setup Fixed IP settings for your print server configuration (page 20 on the manual).

Let me know how that went. I believe you will manage to do it that way quite easily.

**Don’t Forget to vote how helpful this was.**

Оцените статью
Добавить комментарий